DescriptionDesigned for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.Features:Basic dc accuracy 0.5�T III 600 V safety ratedDiode and continuity test with buzzerSmall lightweight design for one-handed useRugged, durable designAutomatic shutdownBattery is easy to replaceElectrical SpecificationsV AC (40-500Hz)Range600.0 mV 6.000 V 60.00 V 600.0 VResolution0.1 mV 0.001 V 0.01 V 0.1 VAccuracy3.0%±3 digit 1.0%±3 digitV DCRange6.000 V 60.00 V 600.0 VResolution0.001 V 0.01 V 0.1 VAccuracy0.5%±3 digitResistance OhmsRange400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩResolution0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩAccuracy0.5 %±3 digit 0.5 %±2 digit 0.5 %±2 digit 0.5 %±2 digit 0.5 %±2 digit 1.5%±3 digitCapacitanceRange50.00 nF 500.0 nF 5.000 μF 50.00 μF 100.0 μFResolution0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μFFrequency (10 Hz – 100 kHz)Range50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHzResolution0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHzDuty CycleRange0.1 % to 99.9 %Resolution0.1 %General SpecificationsCAT RatingCAT III 600 VV AC Range600.0 VV DC Range600.0 VOhms Range40.00 MΩAuto ShutoffYContinuityYCapacitor100.0 μFFrequency100.0 kHzHoldNoDuty CycleYesSize130 mm x 65 mm x 27mmWeight160 gBatteryTwo AAAWarranty1 yearEnvironmental SpecificationsOperating Temperature0 °C to 40 °CStorage Temperature-30 °C to 60 °COperating HumidityNon condensing (<10 °C) <=90% RH (at 10 °C to 30 °C) <=75% RH (at 30 °C to 40 °C) (Without Condensation)Operating Humidity, 40 MΩ80% RH 10 °C to 30 °C, 70% RH 30 °C to 40 °COperating Altitude2,000 metersStorage Altitude12,000 metersIP RatingIP 40 per IEC 60529Vibration RequirementsMIL-PRF-28800F, Class 2Drop Test Requirements-10°C and 1 meter to surface, per IEC-61010-1, and Fluke SOP 39.1 for portable Hand-held equipment Shipping container drop per Fluke SOP 39.EMI, RFI, EMCMust meet all applicable requirements in IEC/EN 61326-1Absorption/CorrosionPer Fluke SOP 39.1Temperature CoefficientsAdd 0.1 x specified accuracy for each degree C above 28 °C or below 18 ºCIncludes: Fluke 101 Basic Digital MultimeterTl75 Hard Point Test Lead SetTwo AAA Batteries (Installed)
